51
Remote File Search
This last search mode is best
used when you have a channel
set to constantly record but it
also works if you know when
an event occurred.
The results list and playback
will resemble that seen in the
Event Search, above, but
will not show the event type,
rather it’ll display the start and
end times along with which
channel.
PICTURE 4-24
PICTURE 4-25
SETTINGS
The Settings menu is also located at the top of the screen. It allows you configure both QT
View on your mobile device as well as make or change settings on your DVR itself. The local
settings are covered in this manual along with the Schedule and PTZ on-DVR settings. The
remainder of the on-DVR settings mirror those conducted at the DVR itself and are therefore
covered in the User Manual.
Local Settings
You can set the maximum amount of space set aside for video recordings on your device
using the Storage options.
The Display settings allow you to set the application to launch in your preferred viewing
mode, whether single view, or multiple channel display.
Alarm enables an audio and vibration alert when the DVR either detects motion or some other
alarm input.
Enabling Auto Reconnect will cause the program to attempt to re-establish your connection
to the DVR if it is lost.
To Next Page
Loading...
Need help?
General
