Q-See QT SERIES User Manual

37
Snap Tab
In this tab, you can configure how many still images are taken, the quality of the images and
the timing between them when the Snapshot button is pushed on the Control Bar.
PICTURE 4-18
EnableEnable SnapSnapRecord BitrateRecord Bitrate Recycle RecordRecycle RecordTimeTime StampStamp
RECORDRECORD
DefaultDefault
ApplyApply ExitExit
Resolution
Quality
Snap Time Interval [S]
Snap Number
Resolution
Quality
Snap Time Interval [S]
Snap Number
CIFCIF
MediumMedium
22
11
Recycle Record Tab
This is selected by default. Recycle record allows the DVR to record over old events when
the hard drive is full. Otherwise, the DVR will stop recording when there is no more space
available.

Q-See QT SERIES Specifications

General

Brand	Q-See
Model	QT SERIES
Category	DVR
Language	English