59096-02 C 1-1
Section 1
Introduction
This manual describes the features and installation of the SANbox® 5600 Fibre
Channel switch, firmware version 5.0. This includes the model 5600 switch and
the model 5602 switch with dual replaceable power supplies. This manual is
organized as follows:
Section 1 describes the intended audience, related materials, safety notices,
communications statements, laser safety information, electrostatic discharge
sensitivity precautions, accessible parts, general program license, and
technical support.
Section 2 is an overview of the switch. It describes indicator LEDs and all
user controls and connections.
Section 3 describes the factors to consider when planning a fabric.
Section 4 explains how to install and configure the switch.
Section 5 describes the diagnostic methods and troubleshooting
procedures.
Section 6 describes the removal and replacement of field replaceable units.
This includes media transceivers for both models and power supplies for
model 5202 switches.
Appendix A lists the switch specifications.
Appendix B describes the Telnet command line interface.
Please read the communications statements and laser safety information later in
this section. Use this manual with the SANbox 5600 Series Switch Management
User’s Guide.
1.1
Intended Audience
This manual introduces users to the switch and explains its installation and
service. It is intended for users who are responsible for installing and servicing
network equipment.
To Next Page
Loading...
Need help?
General
