B ā Command Line Interface
Reset Command
B-48 59096-02 C
S
Notes The following tables specify the various factory default settings:
Enter the Show Config Switch command to display switch configuration
values.
Table B-9. Switch Configuration Defaults
Parameter Default
Admin State Online
Broadcast Enabled True
InbandEnabled True
FDMIEnabled True
FDMIEntries 1000
DefaultDomain ID 1 (0x Hex)
Domain ID Lock False
Symbolic Name SANbox
R_A_TOV 10000
E_D_TOV 2000
Principal Priority 254
Configuration Description Config Default
InteropMode Standard
LegacyAddressFormat False
To Next Page
Loading...
