4 – Installation
Installing a Switch
59096-02 C 4-11
A
4.2.5
Install the Management Application
You can manage the switch using SANsurfer Switch Manager as a standalone
application or as a part of SANsurfer Management Suite™. SANsurfer
Management Suite is QLogic’s integrated fabric management application,
managing both HBAs and switches.
If your switch was shipped with a SANsurfer Switch Manager Disk, refer to
”SANsurfer Switch Manager” on page 4-11 for instructions on how to install
SANsurfer Switch Manager.
If your switch was shipped with a SANsurfer Management Suite Disk, refer
to ”SANsurfer Management Suite” on page 4-13 for instructions on how to
install and upgrade SANsurfer Management Suite.
Refer to the SANbox 5600 Series Switch Management User’s Guide for more
information about using, exiting, and uninstalling SANsurfer Management Suite
and SANsurfer Switch Manager.
4.2.5.1
SANsurfer Switch Manager
You can install SANsurfer Switch Manager on a Windows, Linux, Solaris, or
Mac OS X workstation. To install the SANsurfer Switch Manager application from
the SANsurfer Switch Manager Installation Disk, do the following:
For a Windows platform:
1. Close all programs currently running, and insert the SANsurfer Switch
Manager Installation Disk into the management workstation CD-ROM drive.
2. In the upper left corner of the product introduction screen, click
Management Software.
3. Locate your platform in the table and click Install.
If the product introduction screen does not open in step 2, open the CD with
Windows Explorer and run the installation program with the following path:
data\files\Management_Software\Windows\Windows_5.00.xx.xx.exe
To Next Page
Loading...
Need help?
General
