Qlogic SANbox 5600 Series Installation Guide

59096-02 C A-1
Appendix A
Specifications
This appendix contains the specifications for the SANbox 5600 Series Fibre
Channel switch. Refer to Section 2 General Description for the location of all
connections, switches, controls, and components.
A.1
Fabric Specifications
Fibre Channel Protocols................. FC-PH Rev. 4.3
FC-PH-2
FC-PH-3
FC-AL Rev 4.6
FC-AL-2 Rev 7.0
FC-FLA
FC-GS
FC-GS-2
FC-GS-3
FC-FG
FC-Tape
FC-VI
FC-SW-2
Fibre Channel Element MIB RFC 2837
Fibre Alliance MIB Version 4.0
Fibre Channel Classes of Service .. Classes 2 and 3
Modes of Operation........................ Fibre Channel Classes 2 and 3,
connectionless
Port Types
 1/2/4-Gbps Ports.......................
 10-Gbps Ports...........................
G_Port, GL_Port, F_Port, FL_Port, E_Port
G_Port, F_Port, E_Port
Port Characteristics ........................ All ports are auto-discovering and
self-configuring.

Qlogic SANbox 5600 Series Specifications

General

Brand	Qlogic
Model	SANbox 5600 Series
Category	Switch
Language	English