Qlogic SANbox 5600 Series

1 – Introduction
Communications Statements
59096-02 C 1-5
A
1.6.4
CE Statement
The CE symbol on the equipment indicates that this system complies with the
EMC (Electromagnetic Compatibility) directive of the European Community
(89/336/EEC) and to the Low Voltage (Safety) Directive (73/23/EEC). Such
marking indicates that this system meets or exceeds the following technical
standards:
 EN60950:2000 – “Safety of Information Technology Equipment”.
 EN60825-1/A2:2001 – “Safety of Laser Products, Part 1".
 EN55022:1998 – “Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment”.
 EN55024-1:1998 – “Electromagnetic compatibility - Generic immunity
standard Part 1: Residential commercial, and light industry.”
 IEC1000-4-2:1995 – “Electrostatic Discharge Immunity Test”
 IEC1000-4-3:1995 – “Radiated, Radio-Frequency, Electromagnetic
Field Immunity Test”
 IEC1000-4-4:1995 – “Electrical Fast Transient/Burst Immunity Test”
 IEC1000-4-5:1995 – “Surge Immunity Test”
 IEC1000-4-6:1996 – “Immunity To Conducted Disturbances, Induced
By Radio-Frequency Fields”
 IEC1000-4-8:1993 – "Power Frequency Magnetic Field Immunity Test”
 IEC1000-4-11:1994 – “Voltage Dips, Short Interruptions And Voltage
Variations Immunity Tests”
 EN61000-3-2:1995 – “Limits For Harmonic Current Emissions (Equipment
Input Current Less Than/Equal To 16 A Per Phase)” Class A
 EN61000-3-3:1995 – “Limitation Of Voltage Fluctuations And Flicker In
Low-Voltage Supply Systems For Equipment With Rated Current Less Than
Or Equal To 16 A”