Qlogic SANbox 5600 Series

B – Command Line Interface
CIM Command
59096-02 C B-11
A
CIM Command
Manages CIM listener and subscription configurations on the switch. Refer to the
”CIMListener Command” on page B-13 for information about creating and
modifying CIM listeners. Refer to the ”CIMSubscription Command” on page B-15
for information about creating and modifying CIM subscriptions.
Authority Admin session
Syntax cim
cancel
clear
edit
limits
save
Keywords cancel
Terminates the current CIM edit session without saving changes that were made.
clear
Clears all CIM listener and subscription configurations from the switch.
edit
Opens a CIM edit session.
limits
Displays the maximum allowed number of CIM listeners, subscriptions, and
subscriptions per listener. This keyword does not require an Admin session nor a
CIM edit session.
save
Saves all changes made during the current CIM edit session.
Examples The following is an example of the CIM Edit command:
SANbox (admin) #> cim edit
SANbox (admin-cim) #> cimlistener create CIM_listener_1
.
.
.
SANbox (admin-cim) #> cim save