4 ā Installation
Installing a Switch
4-12 59096-02 C
S
For a Linux platform:
Open the CD and run the installation program with the following path:
data/files/Management_Software/Linux/Linux_5.00.xx.xx.bin
If there is no CD-ROM icon, do the following:
1. Open an xterm or other terminal window.
2. Mount the CD-ROM. From a shell prompt, enter the following:
mount /mnt/cdrom
3. Change directory to the location of the install program:
cd /mnt/cdrom/data/files/Management_Software/Linux
4. Execute the install program and follow the installation instructions.
Linux_5.00.xx.xx.bin
For a Solaris platform:
1. Open a terminal window. If the disk isnāt already mounted, enter the
following command:
volcheck
2. Enter following command to move to the directory on the CD that contains
the executable:
cd /cdrom/cdrom0/data/files/Management_Software/solaris
3. Execute the install program and follow the installation instructions:
Solaris_5.00.xx.xx.bin
For a Mac OS X platform:
1. Open the CD and move to the following folder:
data/files/Management_Software/MacOSX
2. Double click the application zip file (MacOSX_5.00.xx_xxxx.zip). This will
place the install program on your desktop.
3. Locate the Install program icon on your desktop, execute it, and follow the
installation instructions.
To Next Page
Loading...
