Qlogic SANbox 5600 Series

B – Command Line Interface
Security Command
59096-02 C B-57
A
The following is an example of the Security Limits command:
SANbox #> security limits
Security Attribute Maximum Current [Name]
------------------ ------- ------- ------
MaxSecuritySets 4 1
MaxGroups 16 2
MaxTotalMembers 1000 19
MaxMembersPerGroup 1000
4 group1
15 group2
The following is an example of the Security List command:
SANbox (admin-security) #> security list
SB211.192 #> security list
Active Security Information
SecuritySet Group GroupMember
----------- ----- -----------
No active securityset defined.
Configured Security Information
SecuritySet Group GroupMember
----------- ----- -----------
alpha
group1 (ISL)
10:00:00:00:00:10:21:16
Authentication Chap
Primary Hash MD5
Primary Secret ********
Secondary Hash SHA-1
Secondary Secret ********
Binding 0
10:00:00:00:00:10:21:17
Authentication Chap
Primary Hash MD5
Primary Secret ********
Secondary Hash SHA-1
Secondary Secret ********
Binding 0