B – Command Line Interface
Show Config Command
B-108 59096-02 C
S
Examples The following is an example of the Show Config Port command:
SANbox #> show config port 3
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MFSEnabled True
MSEnabled True
NoClose False
IOStreamGuard Disabled
VIEnabled False
PDISCPingEnable True
The following is an example of the Show Config Port command for a 10-Gbps
port:
SANbox #> show config port 16
Configuration Name: default
-------------------
Port Number: 16
------------
AdminState Online
LinkSpeed 10Gb/s
PortType G
SymbolicName 10G-16
DeviceScanEnabled True
ForceOfflineRSCN False
AutoPerfTuning False
LCFEnabled False
MFSEnabled False
MSEnabled True
IOStreamGuard Disabled
VIEnabled False
PDISCPingEnabled True
To Next Page
Loading...
Need help?
General
