B – Command Line Interface
Show Perf Command
B-116 59096-02 C
S
outframe [port_number]
Displays continuous performance data in frames/second transmitted for the port
group (0–15 or 16–19) that includes [port_number]. If you omit [port_number],
ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.
errors [port_number]
Displays continuous error counts for the port group (0–15 or 16–19) that includes
[port_number]. If you omit [port_number], ports 0–15 are displayed. Type “q” and
press the Enter key to stop the display.
Examples The following is an example of the Show Perf command:
SANbox #> show perf
Port Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Number (in) (out) (total) (in) (out) (total)
------ ------- ------- ------- -------- -------- --------
0 7K 136M 136M 245 68K 68K
1 58K 0 58K 1K 0 1K
2 0 0 0 0 0 0
3 0 0 0 0 0 0
4 0 0 0 0 0 0
5 0 0 0 0 0 0
6 0 7K 7K 0 245 245
7 136M 58K 136M 68K 1K 70K
8 7K 136M 136M 245 68K 68K
9 58K 0 58K 1K 0 1K
10 0 0 0 0 0 0
11 0 0 0 0 0 0
12 0 0 0 0 0 0
13 0 0 0 0 0 0
14 0 7K 7K 0 245 245
15 136M 58K 136M 68K 1K 70K
16 47M 23K 47M 23K 726 24K
17 0 0 0 0 0 0
18 23K 47M 47M 726 23K 24K
19 0 0 0 0 0 0
To Next Page
Loading...
Need help?
General
