52
3.4.3 Apple Network
To use the NAS on Apple Mac operating system, enable AppleTalk network support. If
your AppleTalk network uses extended networks, and is assigned with multiple zones,
assign a zone name to the NAS. If you do not want to assign a network zone, enter an
asterisk (*) to use the default setting. This setting is disabled by default.
3.4.4 NFS Service
*This option is supported by “TS-409 Pro” only.
After enabling this service, you can click here to set up the Network access authority to
configure the settings. For detailed configuration, please refer to Chapter 3.7.6. For the
i
nformation of connecting to the NAS via NFS on Linux, please refer to Chapter 12.
To Next Page
