Configuring your Mailing System
119
9
Setting s Overview
This section describes two types of settings:
• User settings, that only last as long as the user who applies them is logged in.
• Supervisor settings, sets the default or permanent characteristics of your Mailing
System.
User Settings
The user settings described in the sections below are:
• Setting the display language
• Adjusting the screen contrast.
Supervisor Settings
The mailing system has one supervisor PIN code that allows you to configure the
mailing functions and perform other functions such as managing accounts and
access rights, generating certain reports, etc.
The supervisor settings allow you to:
• Change the default user settings
• Modify system sleep modes time-outs
• Set credit warnings (high amount, low credit) and activate a crediting PIN code
• Reset the weighing platform
• Design a default imprint (rate, ERA, slogan) and activate the Automatic Date
Advance function
• Enter connection parameters.
9.1 Settings Overview
Other user settings are described in the corresponding sections:
Processing Mail
p.23 ,
Maintaining your Mailing System
p.161 ,
etc.
The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.
ALPHA1_UK.book Page 119 Jeudi, 6. septembre 2012 4:08 16
To Next Page
Loading...
Need help?
General
