Configuring your Mailing System
144
9
Time and Date Management
Daylight Savings Time Transitions
The mailing system normally auto-adjusts to Daylight Savings Time . However, if a
manual adjustment is necessary, you can use either of the following procedures to
correct the mailing system time:
• As User:
How to Unlock the Meter
p.63
• As Supervisor:
How to Check the Machine Time and Date
p.144 below.
Time and Date Checking
The time and date are required for postage and are provided by the postal au-
thorities. As a result, you cannot manually adjust the machine time and date.
However, you can ask the machine to check the current time and date and display
them.
See also
•
Automatic Date Advance
p.135 .
How to Check the Machine Time and Date
How to Check
the Machine
Time and Date
To check the current time and date as Supervisor
(See
How to Log in as Supervisor
p.120):
1 Either:
9.11 Time and Date Management
To check the time and date, make sure the connection to the
Postal Services is available. See
How to Select a Postal/Online
Services Connection
p.140 .
Press and type 6.3
Or
Select the path: > Machine settings > Date and time
If the clock adjusts backwards for 'Daylight savings time', the
mailing system will wait until last postage printing time before
allowing you to process new mail.
ALPHA1_UK.book Page 144 Jeudi, 6. septembre 2012 4:08 16
To Next Page
Loading...
Need help?
General
