Configuring your Mailing System
141
9
LAN Settings
When the LAN connectivity is activated, the Mailing System can connect to the server
via a LAN connection.
How to Set LAN (Hi gh-speed Internet) Parameters
How to Set LAN
(High-speed
Internet)
Parameters
To set the parameters of the LAN logged as Supervisor
(See
How to Log in as Supervisor
p.120):
1 Either:
The LAN configuration menu is displayed.
2 Select > Auto to automatically configure the LAN (recom-
mended).
Otherwise, select > Manual to set parameters manually.
3 Press [OK] four times for a standard LAN configuration.
LAN settings can only be performed if the machine is connected
to the LAN at power-up.
Press and type 9.2
Or
Select the path: > Communication settings > LAN settings
ALPHA1_UK.book Page 141 Jeudi, 6. septembre 2012 4:08 16