88 QXS G2 Hardware Installation and Maintenance Guide
3 Set the date and time so that entries in system logs and notifications have correct time stamps.
• You can set the date and time manually or configure the system to use NTP to obtain them from a
network-attached server.
• When NTP is enabled, and if an NTP server is available, the system time and date can be obtained
from the NTP server.
• This allows multiple storage devices, hosts, and log files to be synchronized.
Click on “Manage Users”.
To secure the storage system, set a new password for each default user.
• A password is case sensitive and can have 8-32 characters.
• If the password contains only printable ASCII characters, then it must contain at least one
uppercase character, one lowercase character, and one non-alphabetic character.
• A password can include printable UTF-8 characters except for the following: a space or “ , < > \
To Next Page
Loading...
Need help?
General