SFP Option for CNC Ports 231
Chapter 10
SFP Option for CNC Ports
This chapter provides the following information:
• Locate SFP Transceivers
• Install SFP Transceiver
• Verify Component Operation
NOTE: This chapter covers the QXS-G2-312, QXS-G2-324, QXS-G2-412, QXS-G2-424, and
QXS-G2-484 systems.
Locate SFP Transceivers
Locate the qualified SFP options for your FC/iSCSI controller canister within your product ship kit. The
SFP transceiver (SFP) should look similar to the generic SFP shown in Figure 179. When installing an
SFP, refer to Figure 179.
Figure 179 Installing a FC/iSCSI SFP in the QXS Controller
2
3
5
6
4
1
To Next Page
Loading...
