107
Italiano
Deutsch
9.4 Steam supply
• Make sure the profiling lever (1) is in position.
• By pressing the steam button (2) the machine prepares to dispense and the
display shows the message Steam Up
SUP
to indicate that the temperature is rising for steam execution
• When the temperature has been reached, the display reads
_S_
• Open the tap (3) to release residual water from the steam wand into the tray.
• Immerse the steam/water lance (4) in the liquid to be heated (milk, water,
etc.).
• Open the side tap (3) to deliver steam.
• When you have finished heating the drink, close the tap and press the Steam
button again (2).
4
2
3
1
To Next Page
Loading...
Need help?
General
