104
Italiano
9. BREWINGS
9.1 Coffee brewing
• Check that the dispensing tap (1) is closed and the profiling valve (2) is facing
the front of the machine (as in the picture on this page).
• Unhook the filter holder (3) from its seat by rotating it clockwise.
• Fill the filter with one or two doses of coffee (depending on the filter inserted).
• Hang up and tighten the filter holder in the dispensing group (4) by turning it
counterclockwise.
• Place the cups at the exit holes under the filter holder.
• Press the coffee dispense switch (5). On the display (6) the delivery seconds
begin to run. If you want to bypass pre-infusion without changing settings in
the menu, press the button coffee 2 times within two seconds.
• To finish brewing coffee, simply press the brewing button again (5).
1
2
3
5
6
4
To Next Page
Loading...
