EasyManua.ls Logo

Quick MILL 938545 - Machine Cleaning; Daily Cleaning; Periodic or after Intensive Use of the Machine

Quick MILL 938545
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
109
Italiano
Deutsch
English
10. MACHINE CLEANING
For cleaning the machine do not use water jets or metal or abrasive
tools such as flakes, metal brushes, needles, etc... and detergents
but use a damp cloth or sponge.
Careful and accurate cleaning of the machine is very important for reliability,
durability and safety in the operation of the device.
10.1 Daily cleaning
Release the filter port from the group and remove it.
Clean the filter and wash it with clean water. This is best if you also use a
brush.
At least once a week, even if the coffee comes out normally, the gasket of the
group must be cleaned using the appropriate brush.
Clean the shell and steam lance.
Check, if necessary, and clean the drip tray.
10.2 Periodic or after intensive use of the machine
In addition to the daily operations, the following operations shall be carried out:
Immerse filters and filter holder in boiling water for a few minutes to help
dissolve the coffee fats, then use a cloth or sponge to remove it.
Clean the water tank.

Table of Contents

Related product manuals