111
Italiano
Deutsch
10.4 Descaling coffee circuit
Use commercially available, non-toxic descaling products for coffee machines.
Follow the manufacturer's instructions on the product packaging.
• Set the set point for coffee temperature to the lowest possible value.
• Place the descaling agent in the water tank.
• With the cold machine just switched on or when the lowest possible set
temperature has been reached, operate the coffee dose dispenser
repeatedly until the tank is completely emptied.
• Rinse the tank and fill it with clean water.
• Operate the coffee dose dispenser repeatedly until the tank is completely
empty.
10.5 Descaling water circuit
Use commercially available, non-toxic descaling products for coffee machines.
Comply with the manufacturer's instructions on the product packaging.
• Place the descaling agent in the water tank.
• Operate 'Water' repeatedly until the tank is completely empty.
• Rinse the tank and fill it with clean water.
• Operate the 'Water' dose repeatedly until the tank is completely empty.
During the descaling process, place a sufficiently large container
under the machine's spout to prevent splashes. Remove splashes
immediately and do not allow them to be absorbed as they may
cause stains or damage.
To Next Page
Loading...
Need help?
General
