Delay
Sometimes, several seconds can pass between
transmissions. To avoid missing a reply, a delay is
automatically set for each channel. The scanner
stops for 2 seconds after a transmission stops
before it resumes scanning or searching.
To turn the delay on or off:
Press FUNC •/Delay when the scanner stops on a
transmission. Lowercase d in the display indicates
delay is off. Uppercase D indicates delay is on.
Note: Delay and delay time can also be set in
each Scannable Object Menu. Search Delay time
can be set in the Global menu. Refer to “Appendix
B: Detailed Menu Reference” on page 102 for a
description of delay settings.
Adjusting the LCD Contrast
You can set the LCD contrast from level 1 to 7.
1. Press PGM for Program Mode.
2. Press GLOB softkey to access Global menu.
3. Press S or T to scroll CONTRAST.
4. Press W or X to select contrast level 1 to 7.
5. Press SAVE softkey to save new setting.
Turning the Key Tone On or Off
Each time you press any of the scanner’s keys, the
scanner beeps.
To turn the scanner’s key tone on or off:
1. Press
PGM for Program Mode.
2. Press
GLOB softkey to access Global menu.
3. Press S or T to scroll Key Beeps.
4. Press
X to select
On or Off.
5. Press
SAVE softkey to save new setting.
Turning Key and Backlight On or Off
1. Press PGM for Program Mode.
2. Press GLOB softkey to access Global menu.
3. Press S or T to scroll to Light Mode.
4. Press X to select backlight operation.
Norml (Normal): Uses the backlight key on
keypad.
Key: Key backlight activates when key is
pressed.
Ignore: Backlight turns on when any key
is pressed, and the key’s normal function is
ignored.
On: Backlight remains on at all time.
Stlth (Stealth): Disables backlight
5. Press S or T to scroll to Light Area.
6. Press X to select area to light when backlight
is on.
Both: LCD and keypad lights.
LCD: Only LCD Lights.
Keybd: Only keypad lights.
7. Press S or T to scroll to Light Secs to
select the time backlight remains on for
Normal, Key and Ignore light modes.
8. Press X to and enter 1 to 99 seconds.
9. Press
SAVE softkey to save new settings.
To Next Page
Loading...
