Refer to “Appendix B: Detailed Menu Reference: TSYS
Menu” on page 113 for more parameters that can
be customized for your system.
Talkgroup Notes:
• A talkgroup object may be configured in one
of four different ways to monitor traffic on a
trunked radio system.
Wildcard Talkgroup: will monitor all
talkgroup call radio traffic on the desired
trunked radio system. (Press
Dflt in the ID:
field to use Wildcard for TGRP object.)
Talkgroup with TGID: will only monitor
talkgroup call radio traffic on the specified
TGID. (Enter the desired talkgroup in the ID:
field of the TGRP object to scan a specified ID.)
Wildcard Private Call: will monitor all private
call radio traffic on the desired trunked
radio system. (Press Dflt in the TGID field
to get Wildcard, and set the Type field to
Private.)
Private Call with ID: will only monitor private
call radio traffic on the specified TGID. (Enter
the desired Radio ID in the TGID field, and set
the Type field to Private.)
Wildcard Talkgroup Notes:
• Wildcard is a special type of TGRP object that
allows you to monitor all talkgroup call traffic
on the associated trunked radio system.
• Wildcard TGRP objects allow you to quickly
find and store new or unknown talkgroups on
a trunked radio system.
• When a Wildcard TGRP object is mapped to
an active Scan List and scanned, all talkgroup
traffic on the system is monitored, and you
have the option to save or lock out new
talkgroups as they appear.
• Wildcard objects are easier to find and
change later if you include an abbreviated
name for the system in the tag field.
• TGRP objects are also used to receive
Private/Individual Calls on trunking systems
that support these call types.
Duplicate (DUPE)
Duplicate (DUPE) is useful when entering multiple
TGRP objects that are hosted on the same
trunked radio system, or multiple CONV objects
that have similar parameters or tag names.
1. Press PGM.
2. Press S or T to scroll to the object that you
wish to duplicate.
3. Press the EDIT softkey, then press the DUPE
softkey.
An exact copy of the object you selected is
created, and the scanner displays the newly
created object menu so you can change the
parameters that need to be changed. Be sure
to change the tag name before saving your
new object.
4. Press the SAVE softkey to save the new
object.
Note: As soon as you press DUPE, a duplicate of
the selected object is created and saved in memory.
Be sure to delete any objects that you create
accidentally. See “Deleting Objects” on page 48.
To Next Page
Loading...
