See “Appendix B: Detailed Menu Reference: LMIT Menu”
on page 116 for detailed menu information.
To create a new LMIT object:
1. Press
PGM for Program Mode.
2. Press
NEW softkey.
3. Press SRCH softkey to view available Search
types.
4. Press LMIT softkey.
5. Press S or T to select FrLo: and FrHi: then
press SEL. to select the field.
6. Use the number keys and • to enter lower
and upper search units and press ENT or the
DONE softkey to save.
7. Press S or T to select Tag:.
8. Use the number keys to enter a name for the
LMIT object. See “Appendix C: Text Entry andAppendix C: Text Entry and
QuickText” on page 125 for information on
entering text.
9. Press ENT or the DONE softkey to save.
10. Press Save softkey to store your LMIT search
as an object.
To activate LMIT search:
1. Press
MAN during scanning to enter Manual
Mode.
2. Press S or T to scroll through the LMIT
objects.
3. Press the SRCH softkey. LMIT search will stop
on an active frequency.
Note: Be sure to press the
SRCH softkey, and not
the SRCH key on the keypad.
3. Press PSE to hold on the active frequency.
Press PSE again to resume.
Note: It can take some time to process all of the
frequencies in a LMIT search. You can experiment
with different size frequency ranges to find a LMIT
search setup that does not interfere excessively
with scanning of other object types.
Service Search Object (SRVC)
A Service Search Object (SRVC) is similar to a
LMIT search but is optimized for a specific radio
service, and can search for activity associated
with a type of service across multiple frequency
bands. See “Dedicated SRVC Search” on page 62
or “Appendix A: Search Bands” on page 100 for sub-
band frequency information.
Essential Parameters
Service type is the critical parameter needed
for a Service Search to function. See “Appendix B:
Detailed Menu Reference: SRVC Menu” on page 119
for detailed menu information.
To Next Page
Loading...
