cannot be scanned by itself and is not considered
a Scannable Object. It is a “configuration object”
that can be used over and over again when
adding talkgroups for a specified trunked radio
system.
LMIT – Limit Search or Search Range Object
LMIT objects contain the parameters necessary
for the radio to search a range of individual
frequencies between a lower and upper limit
frequency.
SRVC – Service Search Object
SRVC objects are further divided into Public
Safety, Aircraft, Amateur, CB, Marine, and FRS/
GMRS/MURS/DOT. SRVC objects are similar to
LMIT objects, but are preprogrammed to search
all frequencies associated with the selected
service.
STLK – Signal Stalker II Object
STLK objects contain the parameters necessary
for the radio to rapidly sweep a range of
radio spectrum for strong signals from nearby
transmitters.
Understanding your Scanner
Scanner Features
Object Oriented User Interface is designed for
ease of use, yet is powerful enough to satisfy the
most sophisticated experts. Common data entry,
browsing and control methods are used for non-
trunked conventional channels, trunking talkgroups,
search configurations and Signal Stalker II setups.
The radio grows with you—you can start out with a
small, easy to manage configuration, then expand it
whenever you need to.
Menu Driven Programming with Context
Sensitive Help – Each menu item provides a few
lines of help text that provide assistance with
programming and using the scanner.
Scan List functionality allows you to arrange, group
and scan objects according to your preference.
Free-Form Memory Organization – Memory
is assigned as objects are created using a
sophisticated internal file management system.
You are not constrained to traditional bank or
channel scanner memory layouts. The scanner
can store over 1,800 conventional channels,
trunking talkgroups, search configurations, and
Signal Stalker II objects in any combination.
V-Scanner Technology – Allows you to save
complete radio configurations within the radio,
for recall into main memory as needed in the
field. Twenty one V-Scanner Folders are provided,
each capable of storing over 1,800 objects. Total
memory capacity of main memory combined with
V-Scanners is over 37,800 objects.
Skywarn Storm Spotter Functionality – Instant
access to frequencies used by storm spotter
networks. You can monitor storm conditions as
they occur, and become aware of dangerous
Understanding your Scanner
To Next Page
Loading...
