Organizing Objects
The following screen appears when the scanner
is
stopped on a conventional channel while scanning.
The following screen appears when the scanner is
stopped on a talkgroup channel while scanning.
Object Numbering
Your PRO-106 is different from other types of
scanners in how it stores your Scannable Objects
in memory. Instead of fixed channels and banks,
objects are stored in the first available block of
free memory and an Object ID is assigned. The
Object ID is the “address” where the object is
stored in memory.
The Object ID and the current Scan List number
are displayed whenever an object is selected in
Manual Mode and Program Mode. The Object ID
is also displayed when the scanner stops on an
active object while scanning.
10-0348 CONV pID
FM 155.95000
FIRE
CT:127.3
Object ID
Scan List
For example: 10-0348 means Object ID 0348 is
mapped to Scan List 10.
To directly access an object using Object ID:
1. Press
MAN or PGM to enter Manual Mode or
Program Mode.
2. Use the number keys to enter the Object ID,
then press ENT.
Note: Objects are not really “in” a Scan List.
Objects are “mapped” to Scan Lists, meaning
that an object can be a member of one or more
Scan Lists. Using the S or T keys to scroll up or
down while viewing a Scan List, will show all the
other objects mapped to that list.
To Next Page
Loading...
