Radio Shack 20-106 - TGRP Menu

110
Menu Reference
111
Menu Reference
CONV
Parameter
Options Description
Skywarn Yes or No When On, the CONV object is
a member of the Skywarn Scan
List.
EXPERT BELOW
Modulation Auto,
AM,
FM,
NFM
Modulation setting for the
CONV channel. In most cases
Auto will work fine. Use AM
to override and force AM
modulation, FM to force FM
modulation, NFM to force
narrow FM modulation.
Atten On or Off When on, applies 20 dB of
attenuation to all transmissions
on the CONV channel. Useful in
areas where interference from
nearby strong signals is present.
Delay On or Off Controls whether a Delay is
used to wait for reply traffic after
a transmission on the CONV
channel.
Delay Time 1-250 x
100ms
Sets the amount of time (in 100
millisecond intervals) for the
wait for reply delay if Delay is
On, e.g., 20=2 seconds.
Digital AGC On or Off Controls Digital AGC function
for the CONV channel.
Supertrack On or Off Alternative DSP decoding algo-
rithm. May help reception on
some systems.
AudioBoost On or Off Applies a 6 dB boost to audio
levels when the object is active.
Hit Count Numeric
value
Increments each time a
transmission is received on
the CONV object. Global “Hit
Counts” must be set to ON.
Press the Dflt softkey to reset
to 0.
TGRP Menu
The TGRP menu is used when creating new
Trunking Talkgroup objects, or editing existing
Trunking Talkgroup objects.
TGRP
Parameter
Options Description
Scan Lists On or Off
for Scan
Lists 1-22
Sets membership in Scan Lists.
Use _` keys to scroll through
Scan Lists. Use SEL key to
toggle Scan List membership. A
“*” next to the Scan List num-
ber indicates that the object is
mapped to that Scan List.
TSYS New or
previously
stored
trunking
system
object
(TSYS)
To enter a new trunking sys-
tem, use the _` keys to scroll
through the stored systems
until NEW appears, then press
SEL to enter the parameters for
the new TSYS. To use a trunking
system that you have previously
entered, use the _` keys to
scroll to the desired system.
ID Decimal,
hex or
AFS, de-
pending
on TSYS
type
The digital address of the talk-
group or individual radio ID on
the trunked radio system.
Type Group or
Private
Use Group for talkgroup ID,
Private for individual radio ID.
Tag Alpha-
numeric
text
The alphanumeric display name
for the TGRP. Use the standard
text entry method or QTXT to
name the object.
L/Out On or Off Permanent lockout for the
TGRP. Also accessed by
pressing FUNC L/OUT while
the scanner is stopped on the
TGRP object.
Priority On or Off Turns Priority Mode on or off for
the TGRP object.