TSYS
Parameter
Options Description
Threshold Hi 1-99 Available When Multi-Site is
set to ROAM. Sets the control
channel decode % threshold for
a site to be considered good
when looking for a new site.
Threshold
Lo
1-99 Available When Multi-Site is
set to ROAM. Sets the control
channel decode % threshold for
a site to be considered out of
range, which will begin the pro-
cess of looking for a new site.
T Tables Default,
Splinter,
Custom
For Motorola and P25 systems
only - sets custom channel
tables. Use _`, to select option,
press SEL on Custom to enter
custom table information.
Fleet Map Type I For Motorola Type I systems
only - sets fleet map.
LMIT Menu
The LMIT menu is used when creating new Limit
Search objects, or editing existing Limit Search
objects.
LMIT
Parameter
Options Description
Scan Lists On or Off
for Scan
Lists 1-22
Sets membership in Scan Lists.
Use _` keys to scroll through
Scan Lists. Use SEL key to tog-
gle Scan List membership. A
“*” next to the Scan List num-
ber indicates that the object is
mapped to that Scan List.
FrLo Any sup-
ported
frequency
in MHz
A frequency that will be used
as the lower limit for the limit
search range.
FrHi Any sup-
ported
frequency
in MHz
A frequency that will be used
as the upper limit for the limit
search range.
LMIT
Parameter
Options Description
Tag Alpha-
numeric
text
The alphanumeric display
name for the LMIT search.
Use the standard text entry
method or QTXT to name the
object.
L/Out On or Off Permanent lockout for the
LMIT channel. Also accessed
by pressing FUNC L/OUT
while the scanner is stopped
on the LMIT object.
LED Mode Solid or
Flash
Controls whether the Alert
LED flashes or remains on sol-
id when the Alert LED is used.
LED Color 0-7 Sets LED color to 0-7 as de-
fined in the GLOB menu. By
default, 0=LED Off, 1=Red,
2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the Alert LED is ac-
tive only while the object is
receiving a transmission. When
Latch is on, the Alert LED will
remain lit after the transmis-
sion is complete, unless over-
ridden by a subsequent object
that is also using the Alert
LED.
Backlight On, Off
or Flash
Controls whether the backlight
should be on, off or flashing
while the object is active.
Alarm None,
Chirp,
Hi-Lo,
Alert,
Ring,
2-Chirp,
Fast
Hi-Lo,
DTMF#
Sets the Audible Alarm for
the LMIT object. When an
Audible Alarm is selected, the
selected alarm will play any-
time the scanner stops for ac-
tivity on the LMIT object while
scanning.
To Next Page
Loading...
