Dedicated Searches
If you want to include or exclude sub bands:
1. Scroll down to
Sub-bands: and press W or X
to scroll through the sub-bands.
2. Press SEL to select On or Off. An asterisk (*)
indicates the sub band is enabled.
3. Press S or T to select Tag: to name your
STLK object.
4. Use the number keys to enter a name. See
“Appendix C: Text Entry and QuickText”Appendix C: Text Entry and QuickText” on page
125 for information on entering text.
5. Press Save softkey to store your STLK search
as an object.
To activate STLK search:
1. Press
MAN during scanning to enter Manual
Mode.
2. Press S or T to scroll through the objects to
STLK.
3. Press the STLK softkey.
Dedicated Searches
Your scanner provides fast access to dedicated
frequency search modes that allow you to
execute searches or run Signal Stalker II without
having to go through the process of setting up
and saving a search object. This is handy for
those times where you need to run a search
quickly. Dedicated search modes do not create
new search objects or use previously created
search objects.
The SRCH key provides immediate access to the
dedicated search modes. Pressing the SRCH key
cycles through each search mode in this order:
Limit, Railroad, Public Safety, Aircraft, Ham, CB,
Marine, and FRS/GMRS/MURS/DOT.
Dedicated LMIT Search
Your scanner’s dedicated LMIT search mode
provides you with the ability to create a limit
search with a search frequency range between
upper and lower limit frequencies that you specify
and perform the limit search directly without
creating a new LMIT object. You can then monitor
that frequency range for transmissions.
To enter LMIT mode:
1. Press
SRCH repeatedly until the display
indicates LMIT search.
2. Press the Lmts softkey to set the lower and
upper frequency limits for your limit search.
Note: When a signal is being received, the
Lmts
softkey (F1) changes to FrL/O. You can access
the
Lmts softkey by pressing FUNC F1 when the
F1 key function is FrL/O.
3. Press S or T to change the search direction.
To Next Page
Loading...
