NS (Not Scanned) Scan List
If you accidently store an object with no Scan List
mappings, the object will be placed in a special
“NS” Scan List.
To access NS scan List:
1. Press
PGM to enter Program Mode or press
MAN to enter Manual Mode.
2. Press W or X to scroll to the NS Scan List.
3. Press S or T to scroll through the NS
objects.
4. Press PGM.
5. Press EDIT softkey.
6. Press CURR softkey to view object menu.
7. Scroll down to Scan Lists:.
8. Press X to scroll through the Scan Lists.
9. Press SEL to select
On or Off the desired
scan list item. The asterisk (*) next to the Scan
List number indicates that the object is a
member of that Scan List.
Favorite List
To add an object to Favorites:
In scan mode, Manual mode or Program mode,
press FUNC, then FAV.
Each scannable object menu also has a
FAV
option. Select YES to add to Favorites.
When FAV is set to YES, the object is a member
of the Favorites Scan List in addition to any other
Scan Lists that it is mapped to.
To activate FAV scan:
Press FAV and the radio suspends scanning of all
objects in the radio except for those that are in
your Favorites list.
To clear FAV scan list:
1. Press
PGM to enter Program Mode.
2. Press the GLOB softkey.
3. Press S or T to scroll to Clear FAV:.
4. Press SEL to set FAV = NO for all objects.
5. Press YES softkey to confirm.
6. Press Save softkey.
Setting the Default Scan List
By default, your scanner will store all new objects,
and objects found during Search, Tune, and
Stalker as mapped to Scan List 01.
You can easily change the default Scan List to any
Scan List you specify, including the special FAV
and Skywarn Scan Lists.
1. Press PGM.
2. Press GLOB softkey.
3. Press T to scroll down to Dflt ScanList.
4. Enter new Scan List number to use as default
scan list.
0: The “not scanned” (ns) Scan List. Objects
with no Scan List mapping.
1 - 20: Normal Scan Lists.
21: FAV Scan List.
22: Skywarn Scan List.
To Next Page
Loading...
