each time a test code is sent.As a confirmation, the
IR segments will display an outgoing animation.
NOTE: If your device or its original remote control
does not have a Power key, select a different test
function in this step (e.g.,CH+, VOL+, PLAY, etc).
5. Aim the remote at the device (e.g., TV) press ▲
one or more times and stop when a working
code performs the test function selected in
step 4.If desired,use
▼ to try a previous code.
NOTE: In the search mode, the remote control will
send IR codes from its library to the selected device,
starting with the most popular code first.
6. To lock in the code, press OK once. The bottom
IR segment flashes twice.
7. To search for codes of your other devices,
repeat steps 3 to 6, but use the appropriate
device key and test function key for the device
you are searching for.
8. To exit programming, press twice. The
display will return to the last-selected device
menu screen.
CHECKING THE CODES
If you have set up the RadioShack 8-in-One
Remote using the Searching For Your Code
procedure (on the left), you may need to find
out which four-digit code is operating your
equipment. For example, to find out which code
is operating your TV:
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press OTHER once. The Other programming
screen will appear:
3. Using the number keys,enter 9 9 0.The
screen flashes twice and changes to the
Code Verification screen.
4. Press a desired device key once (i.e., CBL, SAT,
TV, DVD,AUD, VCR, AUX,or CD). The selected
device key will animate.
5. To view the code for the first digit, press 1
once. Count the number of times the bottom
IR segment flashes (e.g., three flashes = 3)
and write down the number in leftmost box
in the TV code boxes on page 11.
NOTE: If a code digit is “0”, the bottom IR segment
will not flash.
6. Repeat step 5 three more times for remaining
digits. Use 2 for the second digit,3 for the
third digit, and 4 for the fourth digit.Write
down the code digits in the remaining TV
code boxes on page 11.
NOTE: If you enter an invalid number (e.g., 7) or
key (e.g., PLAY), the bottom IR segment will display
one long flash and return to the “Other” program-
ming screen. Start again with step 2 above.
continued on next page...
Searching For Your Code/Checking The Codes 13
OWNER’S MANUAL
To Next Page
Loading...
Need help?
General
