CLEARING ALL
CUSTOM PROGRAMMING
The RadioShack 8-in-One Remote contains a
Custom Programming Reset program.You can use
it to remove all custom programming, except
your setup codes and reassigned device keys.
IMPORTANT: Executing this program will erase all
custom settings for My System, Macros, Learned
Keys, Keymoved Keys, and Favorite Channels.
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press OTHER once. The Other programming
screen will appear:
3. Using the number keys, enter 9 8 0.The
bottom IR segment will flash twice, pause,
and flash twice again to confirm restoration.
4. Exit programming by pressing once.The
display will return to the last-selected device
menu screen
.
SPECIFICATIONS
Remote Power . . . . . . . . . . . . . (4) AAA Batteries
Finder Transmitter Power . . . . . . (1) 9 V Battery
Finder Transmitter to
Remote Range . . . . . . . . . . . . . . . . 40 ft (12.2 m)
Remote Dimensions
(H x W x D). . . . . . . . . . . 9.44 x 2.64 x 1.02 in.
(H x W x D) . . . . . . . . . . . 240 x 67.2 x 26 mm
Finder Transmitter Dimensions
(H x W x D) . . . . . . . . . . . . . . . . . . . ? x ? x ? in.
(H x W x D). . . . . . . . . . . . . . . . . . ? x ? x ? mm
Remote Weight
(no batteries). . . . . . . . . . . . . . . . 0.4 lb (181.4 g)
Finder Transmitter Weight
(no battery). . . . . . . . . . . . . . . . . . . . . . . ? lb (? g)
NOTE: Specifications are typical. Individual units
might vary. Specifications are subject to change and
improvement without notice.
Clearing All Custom Programming/Specifications 29
OWNER’S MANUAL
To Next Page
Loading...
Need help?
General
