Radio Shack Kameleon User Manual

4. To exit programming, press once.The
display will return to the last-selected device
menu screen.
5. Now, when you press VOL
▲,VOL▼,or MUTE,
the selected device’s volume will be con-
trolled, regardless of the mode selected.
UNLOCKING VOLUME CONTROL FOR A SINGLE
DEVICE (INDIVIDUAL VOLUME UNLOCK)
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press VOL once. The Volum e L ock
programming screen will appear:
3. Press VOL
▼ once. Then press a device key once
(i.e., CBL,SAT,TV,DVD,AUD, VCR,AUX,or CD)
where you want the volume controls unlocked.
The bottom IR segment will flash four times
and the program keys will appear again.
4. If desired, repeat steps 1 through 3 (of this
section) for each device that you want volume
to be unlocked.
5. To exit programming, press once.The
display will return to the last-selected device
menu screen.
6. Now, after you select a device that has
volume unlocked, pressing VOL
▲,VOL▼,or
MUTE will control the device’s volume only in
its own mode.
U
NLOCKING ALL VOLUME CONTROL
(RESTORING DEFAULT SETTING)
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press VOL once. The Volum e L ock
programming screen will appear:
3. Press VOL
▲ once.The bottom IR segment
will flash four times and the program keys
will appear again.
4. To exit programming, press once.The
display will return to the last-selected device
menu screen.
5. Volume will again be independently
controlled according to its default states
for all programmed devices.
Changing Volume Lock 17
OWNER’S MANUAL
RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 17

Radio Shack Kameleon Specifications

General

Brand	Radio Shack
Model	Kameleon
Category	Remote Control
Language	English