Radio Shack Kameleon User Manual

4. For the source mode, press a desired device
key once (i.e., CBL, SAT, TV, DVD, AUD, VCR,
AUX,or CD). For this example, press TV once.
The selected source device menu screen,
including ,will be displayed.
5. For the source key, press a key to be moved
once. For this example press VOL
▲ once.
6. For the destination mode, press a desired
device key once (i.e., CBL, SAT,TV, DVD, AUD,
VCR, AUX,or CD). For this example, press DVD
once. The selected destination device menu
screen, including , will be displayed.
7. For the destination key, press a key to be
moved once.For this example press VOL
▲
once. Upon keymoving, the bottom IR
segment will flash twice as confirmation.
The program keys will appear again.
8. Repeat steps 3 through 7 two more times to
map the remaining volume control keys,
substituting VOL
▼ and MUTE as source and
destination keys in steps 5 and 7.
9. Exit programming by pressing once.The
display will return to the last-selected device
menu screen
.
Upon completion of the above procedure, you
can now use your RadioShack 8-in-One Remote
to control the TV’s volume and mute in the DVD
mode, as well as in the TV mode.
RESTORING A SINGLE KEYMOVED KEY
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press OTHER once. The Other programming
screen will appear:
3. Using the number keys,enter 9 9 4.
The bottom IR segment will flash twice.
4. Press the destination mode once where the
keymoved key is stored. Then press the
destination key twice. Upon key restoration,
the bottom IR segment will flash twice
as confirmation.The program keys will
appear again.
5. If desired, repeat steps 1 and 2 to restore
another key.
6. Exit programming by pressing once.The
display will return to the last-selected device
menu screen
.
RESTORING ALL KEYMOVED KEYS IN A
SINGLE MODE
1. Perform steps 1 through 3 of Programming
Keymover on the previous page.
2. Press the destination mode twice where
the keymoved keys are stored. Upon key
restoration, the bottom IR segment will flash
twice as confirmation. The program keys will
appear again.
3. Exit programming by pressing once.The
display will return to the last-selected device
menu screen
.
Using Keymover 21
OWNER’S MANUAL
RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 21

Radio Shack Kameleon Specifications

General

Brand	Radio Shack
Model	Kameleon
Category	Remote Control
Language	English