USING LEARNING (continued)
DELETING ALL LEARNED KEYS IN A
SPECIFIC MODE
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press IR DELETE once. The IR Delete
programming screen will appear:
3. Press a device key once (i.e., CBL,SAT,TV, DVD,
AUD, VCR,AUX,or CD) for the mode where
the learned keys to be deleted reside. The
selected device menu screen, including ,
will be displayed.
4. Press the same device key (as in step 3) once.
Upon deletion, the bottom IR segment will
flash twice as confirmation. The program keys
will appear again.
5. If desired, repeat steps 2 through 4 to delete
other learned keys from another mode.
6. Exit programming by pressing once.The
display will return to the last-selected device
menu screen.
CHANGING VOLUME LOCK
The RadioShack 8-in-One Remote is set at the
factory for independent volume control of each
selected device.
However, you may change the Volume Lock
setting to Global Volume Lock so that a device’s
volume will be locked to one mode (e.g., to
control TV volume in all other modes).After
that, if desired, you can perform Individual
Volum e Un loc k on a selected device to set its
volume control for independent operation.
LOCKING VOLUME CONTROL TO ONE MODE
(GLOBAL VOLUME LOCK)
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press VOL once. TheVolum e L oc k
programming screen will appear:
3. Press a device key once (i.e., CBL,SAT,TV, DVD,
AUD, VCR,AUX,or CD) where you want the
volume controls locked to. The bottom IR
segment will flash twice and the program
keys will appear again.
16 Using Learning/Changing Volume Lock
8-IN-ONE REMOTE POWERED BY KAMELEON
To Next Page
Loading...
Need help?
General
