REASSIGNING DEVICE KEYS
The RadioShack 8-in-One Remote can be set to
control a second device. For example, to control
a TV, a Cable Box, and two DVD Players, you can
reassign the unused AUX key to operate the
second DVD Player as follows:
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press MODE once. The Mode Mover
programming screen will appear:
3. For the source mode, press a device key
once (i.e., CBL, SAT,TV,DVD, AUD,VCR, AUX,
or CD). For this example, press DVD once.
The selected device menu screen, including ,
will be displayed.
NOTE: Only one device can be assigned to an
unused device key at a time.
4. For the destination mode,press a device key
once (i.e., CBL, SAT,TV, DVD,AUD, VCR, AUX,or
CD). For this example, press AUX once. Upon
reassignment, the bottom IR segment will
flash twice as confirmation. The program keys
will appear again.
5. For this example, the AUX key is now ready to
be set up to control your second DVD player.
See Programming A Device on page 10.
▲
If desired, repeat steps 2 to 5 to reassign
another device.
6. Exit programming by pressing once.The
display will return to the last-selected device
menu screen
.
USING COMMERCIAL SKIP
The RadioShack 8-in-One Remote includes a
unique feature for skipping past commercials
on recorded programs when using a PVR (DVR)
or VCR. This features works in the CBL, SAT,
VCR,or AUX mode and you can use the default
settings or program custom ones.
USING THE DEFAULT SETTINGS
The COM SKIP key is preprogrammed to perform
the Commercial Skip function of your original
remote control (if available).
To use the default setting, simply aim the
remote at the desired device, and press COM
SKIP once for each skip of two commercials.
PROGRAMMING COMMERCIAL SKIP
To customize Commercial Skip settings, perform
the following steps:
1. Turn on a desired device (e.g.,VCR or PVR)
and view the commercials you want to skip.
Then position the media back to the start of
first commercial in the sequence.
2. Press the appropriate assigned device key
once (i.e., CBL, SAT,VCR,or AUX). The selected
device key will animate.
continued on next page...
Reassigning Device Keys/Using Commercial Skip 25
OWNER’S MANUAL