DEVICE TABLE
NOTE: Please refer to the table below when performing
the instructions in “Programming A Device ” on the
next page.
After programming, the RadioShack 8-in-One
Remote will be able to control the following
types of devices:
ADJUSTING BRIGHTNESS
The RadioShack 8-in-One Remote has five
levels of brightness adjustment and is set to the
middle one at the factory. To increase or decrease
the brightness, perform the following steps:
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear.
NOTE: If the display turns off because of inactivity,
you will need to start the programming sequence
again by repeating this step.
2. Press once.The Brightness programming
screen will appear:
• To increase brightness, press
▲ one or
more times.
• To decrease brightness, press
▼one or
more times.
3. When desired brightness is achieved, press
twice to exit programming and return to the
last-selected device menu screen.
NOTE: The remote includes a tilt switch that turns
on the display when the unit is moved. If desired,
you can disable this feature. See “Setting The Tilt
Switch”on page 26.
A Quick Look At The Controls/Adjusting Brightness 9
OWNER’S MANUAL
DEVICE KEY CONTROLS THESE DEVICES
Cable Box (Converter) or
Video Accessory
Satellite Receiver or
Satellite/PVR Combo
Tel e v i si on
DVD Player, TV/DVD Player
Combo, or DVD/VCR Player
Combo
Audio Amplifier, Audio
Receiver, or Home-Theater
in-a-Box (HTiB) Device
VCR, TV/VCR Combo, or
PVR (DVR)
PVR (DVR),VCR, or
TV/VCR Combo
CD Player or CD Recorder
To Next Page
Loading...
Need help?
General
