USING MY SYSTEM MODE
PROGRAMMING MY SYSTEM MODE (CONT’D)
3. Press MY SYSTEM once. The Video Playback
programming screen will appear:
NOTE: For steps 3 through 7, if a device key is
animated, it is assigned to its respective function
group. To continue programming the My System
mode,you must select a device key, even if it is the
same one that is currently animated.
4. To assign a mode to the Video Playback group,
press a device key once (i.e., CBL, SAT, TV, DVD,
AUD, VCR,AUX,or CD). Then the Vo lum e
Controls programming screen will appear:
5. To assign a mode to the Volume Co nt rol s group,
press a device key once.Then the Channel
Controls programming screen will appear:
6. To assign a mode to the Channel Controls
group, press a device key once.Then the Menu
Controls programming screen will appear:
7. To assign a mode to the Menu Controls group,
press a device key once. Since My System
programming is now complete, the program
keys will appear again.
8. Exit programming by pressing once.The
display will return to the last-selected device
menu screen
.
24 Using My System Mode
8-IN-ONE REMOTE POWERED BY KAMELEON
To Next Page
Loading...
Need help?
General
