Radio Shack Kameleon User Manual

To find out what keys appear when the program
mode is activated or when a device is selected,
see the Device Menu Screens section starting on
page 32. Included are brief descriptions of how
the keys work for each displayed screen.
KEY FUNCTIONS
When a key is pressed, the
IR Segments will animate.
Outgoing animation (see
arrow) indicates the remote
is sending IR signals to a
selected device.
Incoming animation
indicates the remote is
receiving IR signals from a
device being learned (see
Using Learning on page 14).
During programming, the
bottom IR segment flashes
to confirm setup actions.
Press CBL,SAT,TV,DVD,
AUD,VCR, AUX,or CD once
to select a device to control.
The selected device key will
animate to indicate it is
currently active.Also see
the Device Table on page 9.
After programming, press
MY SYSTEM once to select
your custom system
controls. See Using My
System Mode on page 23.
Use P to enable the
programming screen.
In the CBL or SAT mode,
use PAGE+ or PAGE- to
page up or page down
through channels in the
program guide.
Press PWR once to turn on
or off a selected device.
continued on next page...
A Quick Look At The Controls 5
OWNER’S MANUAL
RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 5

Radio Shack Kameleon Specifications

General

Brand	Radio Shack
Model	Kameleon
Category	Remote Control
Language	English