In the CBL,SAT,VCR,or AUX
mode, use COM SKIP to skip
commercials on devices
with PVR capabilities (see
Using Commercial Skip on
page 25).
In all modes except AUD,
use the number keys
(1 ~ 9 and 0) to directly
select channels (e.g., 009
or 031) or enter numbers.
In the AUD mode, INPUT
will appear. Use the num-
ber keys to directly select
inputs 1 ~ 9 and 10.
For certain brands in all
modes except CD,press
ENTER once after entering
numbers (if required on
original remote control).
In the TV mode,use +100 to
enter numbers above 100 (if
required on original remote
control). In the CD or DVD
mode, use +100 to access
tracks above 10 (if required
on original remote control).
In the AUD mode,use +100
to change the radio band.
In the program mode,
use the program keys to
personalize the remote
control as follows:
Use DEV SET to program
your device codes.See
Programming A Device on
page 10.
Use SEARCH as an alternate
way to set up a device by
searching available codes.
See Searching For Your Code
on page 12.
Use MACRO to program a
series of commands on five
available macro keys. See
Using Macros on page 18.
Use VOL to set volume
controls for individual or
global device use.See
Changing Volume Lock on
page 16.
Use MY SYSTEM to create a
custom mode with favorite
remote control keys from
different devices in your
home theater system. See
Using My System Mode on
page 23.
Use to adjust the bright-
ness level of the EL display.
See Adjusting Brightness on
page 9.
Use IR LEARN and IR
DELETE to add and delete
key functions learned from
your original device remote
controls. See Using
Learning on page 14.
Use MODE to reassign
an unused device key to
control a second device.
See Reassigning Device Keys
on page 25.
Use OTHER to program
other functions. See Tab le
of Contents on page 2 for
sections on Checking The
Codes,Programming
Favorite Channel Scan,
Using Keymover, Program-
ming Commercial Skip,
Upgrading,Restoring
Default Settings,or Clearing
Programming.
▲
A Quick Look At The Controls 7
OWNER’S MANUAL
NOTE: Press above
the title to activate
a desired program.
For OTHER,press
below the title.
NOTE: Press above
the title to activate
a desired program.
For OTHER,press
below the title.