Raidon SL3610-2S-LB2 - Page 14

2-3-2 Changing Password
2-3-2-1 Input old password
2-3-2-2 Input new password
2-3-2-3 Conrm new password
2-3-3 Reboot the System / Shut Down the System
2-3-3-1 Reboot the system / Shut Down the system
2-3-3-1a Conrm to reboot the system
2-3-3-1b Conrm to shut down the system
2-3-4 Smart Fan & Overheat Alarm Setting
2-3-4-1a/b/c Set the temperature to start Smart Fan : 30/40/50°C three kinds of temperature
for your choice (the default value is 30°C)
2-3-4-2a/b Set the overheat temperature : 50/60°C two kinds of temperature for your choice
(the default value is 50°C)
2. Description of LED Indicators
SL3610-2S-LB2
Front Panel LED
LED Status
Power on Blue / Lights on
Booting Completely Blue / Lights on
RAID Fail Purple / Lights on
Rebuilding Blue / Lights on
Fan Fail Purple / Lights on
Overheat Purple / Lights on
Tray LED
LED Status
Access Blue / Blinks
RAID Fail Red / Blinks (HDD Failed)
Rebuilding
Target HDD: Red / Blinks Slowly & Blue / Blinks Fast
Source HDD: Blue / Blinks
14 Installation