Rational iCombi Classic

8 | Programming mode
Original instructions for use 31 / 64
Program Steps Settings
Step 2
n
Cooking cabinet temperature: 284°F
n
Cooking cabinet humidity: 60%
n
Fan speed level: 4
n
Cooking time: 24 minutes
Step 3
n
Mode: Hot air
n
Cooking cabinet temperature: 284°F
n
Cooking cabinet humidity: 60%
n
Fan speed level: 4
n
Cooking time: 1 minute
Plate Finishing Step 1
n
Mode: Combi mode
n
Preheat: 266°F
Step 2
n
Cooking cabinet temperature: 265°F
n
Cooking cabinet humidity: 80%
n
Fan speed level: 4
n
Cooking time: 8 minutes
More information on Finishing is available here [}28].
8.3 Creating a new program
1. On the home screen, press this button:
2. Press this button:
3. Press this button:
4. Use the selection knob to enter the program name. You can use any combination of upper- and lower-case
letters or numbers. To switch between keyboard options, press this button: ABC
5. To correct your entry, press this button:
6. Once you have finished naming your program, press this button to confirm the name:
> The buttons for the operating modes will begin blinking.
7. Select an operating mode.
> The button for that mode will be highlighted.