11 | Automatic cleaning
Original instructions for use 43 / 64
3. Start the cool down function to reduce the cooking cabinet temperature. More information is available here:
Functions
4. Press this button: IIII
5. Turn the central selection knob to choose a cleaning program [}41].
6. Open the cooking cabinet door.
7. Remove all containers and trays from the cooking cabinet.
8. WARNING!Risk of chemical burns! Wear mouth protection and chemical-resistant gloves to protect
yourself reliably when working with Active Green cleaner tabs and care tabs. Unpack the displayed number
of Active Green cleaner tabs and place them in the drain sieve of the cooking cabinet.
9. Unpack the displayed number of care tab packages and place them in the care drawer.
10. Close the cooking cabinet door.
11. To confirm, press this button:
>> The automatic clean starts.
>> Once the automatic clean is completed, an acoustic signal will sound.
TIPS:
n
If foam builds up in the cooking cabinet even though you have used the recommended number of Active
Green cleaner tabs, use fewer tabs the next time you run automatic cleaning. If foam continues to build up,
please contact your RATIONAL Service Partner.
n
You can use the LED lighting to illuminate the cooking cabinet during cleaning. To activate lighting, press this
button:
11.4 Canceling automatic cleaning
You can cancel any automatic cleaning programs within 30 seconds of starting them. Once automatic cleaning has
started, it can no longer be canceled.
1. Press and hold the button until the status bar is shown in full:
> You will be prompted to open the cooking cabinet door and remove the Active Green cleaner tabs.
2. Open the cooking cabinet door.
To Next Page
Loading...
Need help?
General
