Rational iCombi Classic

8 | Programming mode
Original instructions for use 33 / 64
Adding another cooking step
1. Press this button:
> The buttons for the operating modes will begin blinking.
2. Choose a mode and finish programming the cooking step.
Editing a cooking step
1. To edit the cooking step, press this button:
2. Choose a mode and edit the cooking parameters as desired
Deleting a cooking step
1. To delete a cooking step, press this button:
>> The cooking step will be deleted.
Saving a program
1. To save your program, press this button:
>> The program will be added to the bottom of the program list. You can now start the program [}33].
8.4 Starting a program
1. Press this button:
2. Press this button:
3. Turn the central selection knob and choose a program.
4. Press the central selection knob to confirm your selection.
>> The program will be started, and the unit will begin performing the first cooking step.
8.5 Editing a program
1. Press this button:
2. Press this button:
3. Turn the central selection knob and choose a program.
4. Press this button: