Fault Possible cause Measure
Metering openings clogged by:
• Fertilizer clumps
• Moist fertilizer
• Other impurities (leaves,
straw, bag residues)
Blockages
u
Park tractor, remove ignition
key, disconnect the power
supply,
u
Open metering slides.
u
Place the collecting vessel
underneath.
u
Remove spreading discs.
u
Clean the outlet from below
with a wooden pole or the
adjustment lever and push
through the metering
opening.
u
Remove foreign bodies from
the hopper.
u
Install spreading discs, close
metering slides.
10. Faults and possible causes
110
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
