Rauch MDS 8.2 - Connecting the Metering Slide Actuators; Connecting the Hydraulic Slide Actuator

Fig. 27: Attachment of the machine on the lower coupling point of the lower link
The following applies:
• A + crop height ≤ V: max. 730
• B + crop height ≤ H: max. 830
7.6 Connecting the metering slide actuators
7.6.1 Connecting the hydraulic slide actuator:
n
Version K/D/D Mono
Tractor requirements
• Version K: two single-acting control valves
• Version D: two double-acting control valves
• Version D Mono: one double-acting control valve
Function
The metering slides are controlled separately by two hydraulic cylinders. The hydraulic cylinders are
connected to the slide actuator on the tractor via hydraulic hoses.
7. Commissioning
MDS 8.2/14.2/18.2/20.2 5902916
57