Rauch MDS 8.2 - Name Plate and Machine Marking; Reflector

Illustration Description
The frame and hopper are delivered separately:
u
Assemble only frames and hoppers with the same serial number.
w
Compare the stickers on the frame and the hopper.
3.12 Name plate and machine marking
When delivering your machine, ensure that all necessary signs are present.
Depending on the country of destination, additional signs can be attached to the machine.
Fig. 4: Name plate
[1] Manufacturer
[2] Serial number
[3] Machine
[4] Type
[5] Empty weight
[6] Year of construction
[7] Model year
3.13 Reflector
The lighting equipment must be attached as specified and must always be in operating condition.
Lights must not be covered or obscured by dirt.
3. Safety
MDS 8.2/14.2/18.2/20.2 5902916
23