Spreading width correction
The values in the chart are standard values. If there are differences in the fertilizer quality, it may be
necessary to correct the setting.
• In order to reduce the spreading width, swing closer to the spreading disc.
• In order to increase the spreading width, swing away from the spreading disc.
9.10.3 Adjusting the TELIMAT full and limited border spreading unit
The TELIMAT T1 is a remote-controlled full and limited border spreading unit for working widths of 10 -
24 m (20 - 24 m for limited border spreading only).
The TELIMAT T1 is mounted on the left side of the machine in the direction of travel. You can control
the TELIMAT unit from the tractor via a single-acting control valve.
Mounting of the TELIMAT on the machine is described in detail in a separate assembly manual.
This assembly manual is included in the scope of delivery of the TELIMAT unit.
n
Adjusting the TELIMAT unit
You prepare the TELIMAT unit for spreading in accordance with the fertilizer type, the working width
and the desired type of boundary spreading (limited or full border spreading).
The setting values are provided in the fertilizer chart.
9. Spreading operation
96
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
