Rauch MDS 8.2 - Settings for Unlisted Fertilizer Types; Requirements and Conditions

Fig. 49: Version D Mono: Position of the ball valve
A Spread on both sides B Spread on left only
9.9 Settings for unlisted fertilizer types
The settings for fertilizer types not listed in the fertilizer chart can be calculated using the practice test
kit (optional equipment).
For calculating the settings for unlisted fertilizer types, please also see the supplementary manual
for the practice test kit.
To check the spreading unit settings quickly, we recommend using the layout for one pass.
To determine the spreading unit settings more accurately, we recommend using the layout for three
passes.
9.9.1 Requirements and conditions
The requirements and conditions apply to both one pass and three passages.
Observe these conditions to ensure that the results are as accurate as possible.
9. Spreading operation
88
5902916 MDS 8.2/14.2/18.2/20.2